BOJACK SPP6 Hard Start Capacitor Replacement for Air Conditioning Units

The BOJACK SPP6 Hard Start Air Conditioner Relay or Capacitor Kit is designed for permanent split capacitor single-phase air conditioning and heat pump systems. Starting capacitors are used in single-phase AC motors, air conditioners, refrigerator compressors, and other equipment to provide 500% starting torque.

If your new or old compressor won't start, trying installing this hard-start capacitor before doing anything else. Starting an air conditioner or heat pump compressor (reciprocating and scroll) requires an extra electrical "shock" to start. This kit is specifically designed for equipment requiring hard-start capacitors, such as heat pump or condenser split systems with (TXV) installed, and old heat pump or condenser that is mechanically stuck and not working.

The installation of the SPP6 kit is relatively straightforward. The two wires of the SPP6 are connected in parallel with the run capacitor, with one wire on each side, without removing any of the original wires. If all run capacitor terminals are being used, the SPP6's special "piggyback" terminals can be utilized.

For Permanently Split Capacitor (PSC) type compressors, the two-wire hard-start kit is connected in parallel with the run capacitor. For Capacitor Start Induction Run (CSIR) type compressors, the kit connects to the start and run terminals on the compressor. A third connection to the common wire is not required.

It is important to check the model number on the compressor (printed on the nameplate on the side) to determine the tonnage of the unit. This information is necessary to ensure the compatibility of the SPP6 kit with the specific air conditioning or heat pump system.

The package includes 1 pcs of the SPP6 Hard Start Air Conditioner Relay or Capacitor Kit. The SPP6 compressor hard start boost capacitor can save compressor aging by increasing compressor starting torque by 500%. The kit is available for a variety of air conditioner compressors, from 4,000 BTU window units to 120,000 BTU commercial units.

The motor starting capacitor and the PTC thermistor are connected in series, with no loose parts and complicated wiring. The "piggyback" terminal wiring is adopted, making the installation process easy on the running capacitor.

The SPP6 kit is a replacement part for various model numbers, including TJ90HS6, AP4502872, HS6, HS650, 35702, DST-6, EPP6, HS6, and HS650. It is widely used in air conditioner start capacitor, air conditioner soft start, AC hard start kit, AC capacitor, HVAC capacitor, HVAC hard start kit, and other related applications.

product information: